By Mike Bessant View In Digital Edition
Incorporate additional instrumentation to a flight recorder to measure a rocket's rate of roll, relative altitude, and booster-stage separation detection.
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of Nuts & Volts, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue icon let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Although the schematic is correct, there are errors in the SYMBOL table that is at the start of the program. The correct ions required, to make it match the original schematic, are as follows:
symbol redled = 5
symbol download =7
symbol power = 2
symbol rate = 8
